China 2-3-258kx End Yoke pto shaft bent

Item Description

Our business prodcue all the American tube yoke, flange yoke, weld yoke, center yoke, spline yoke, sip yoke, spline shaft and and so forth. so if you have interest for these areas, remember to come to feel free of charge contact us, thank you extremely significantly advance!!!

 Standard Component #  Series ( E )Length Across Lugs ( D )Bearing Diameter ( M )Spline Diameter & Variety ( J )Centerline to Stop of Spline ( Q )Duration  of Thru Hole
nine-3-481KX 1910 2.fifty six” 3.163″-36 Inv. 8.94″ six.thirty”
9-3-481-1KX 1910 2.fifty six” 3.163″-36 Inv. 11.94″ 9.thirty”
nine-3-351-1KX 2150 4.750″ 5.835″-34 Inv. twenty.938″ seventeen.87″
nine-3-331-4KX 2050 three.812″ five.835″-34 Inv. seventeen.56″ fourteen.fifty”
nine-3-331-2KX 2050 three.812″ five.835″-34 Inv. eleven.938″ 8.fifty”
9-3-331-1KX 2050 three.812″ five.835″-34 Inv. 15.438″ 12.38″
nine-3-261KX 1950 three.062″ 4.167″-24 Inv. nine.688″ 6.126″
nine-3-241KX 1950 three.062″ four.167″-24 Inv. 10.875″ seven.313″
9-3-221KX 1950 3.062″ four.167″-24 Inv. thirteen.875″ 10.313″
eight-3-431KX 1880 eight.09″ 2.eighteen” 4.17″-24 Inv. five.03″ 3.62″
eight-3-411KX 1880 eight.09″ two.18″ 3″-sixteen eleven.65″ 9.sixty two”
8-3-391KX 1880 8.09″ two.18″ three”-16 ten.03″ 8.00″
six.5-3-1451KX 1810 7.fifty five” one.ninety four” three.25″-18 Inv. five.38″ 3.88″
6.5-3-1431KX 1810 7.fifty five” 1.94″ three”-sixteen 8.94″ 7.38″
6.5-3-1371KX 1810 seven.55″ one.ninety four” 3″-16 eleven.88″ nine.fifty”
six.5-3-1351KX 1810 seven.55″ 1.ninety four” three”-16 ten.25″ seven.88″
six.3-3-41KX 1760 7″ 1.94″ 2.50″-sixteen 9.twenty five” 6.78″
six.3-3-21KX 1760 7″ one.94″ two.50″-sixteen eleven.16″ eight.69″
six-3-2741KX 1710 six.09″ one.94″ two.fifty”-sixteen seven.forty seven” seven.625″
six-3-2671KX 1710 six.09″ one.94″ 2.fifty”-sixteen 9.fifty nine” seven.875″
6-3-2651KX 1710 6.09″ 1.94″ two.fifty”-sixteen 11.69″ nine.twenty five”
six-3-2631KX 1710 six.09″ one.ninety four” two.fifty”-sixteen 8.84″ 7.50″
6-3-1661KX 1710 6.09″ one.94″ 3.twenty five”-eighteen Inv. 4.twelve” two.74″
6-3-1481KX 1710 six.09″ 1.ninety four” three.twenty five”-18 Inv. 4.88″ 3.50″
five-3-288KX 1610 5.31″ 1.88″ 2″-16 9.31″ seven.38″
five-3-2261KX 1610 five.31″ one.88″ 2″-16 ten.eighty one” 8.38″
five-3-2141KX 1610 5.31″ 1.88″ 2″-16 11.ninety four” 9.00″
5-3-198KX 1610 five.31″ one.88″ 2.673″-18 Inv. 4.25″ 3″
5-3-188KX 1610 five.31″ 1.88″ two.673″-eighteen Inv. four.00″ 2.seventy five”
five-3-168KX 1610 five.31″ one.88″ two.673″-18 Inv. three.50″ two.25″
5-3-108KX 1610 five.31″ 1.88″ two”-sixteen 7.eighty one” six.38″
4-3-1751KX 1550 5.25″ one.38″ one.75″-16 five.38″ 4.00″
4-3-1431KX 1550 5.twenty five” one.38″ 1.seventy five”-16 10.06″ eight.00″
four-3-1261KX 1550 5.twenty five” 1.38″ two.fifty”-sixteen three.fifty” 2.56″
4-3-1241KX 1550 five.25″ 1.38″ one.75″-sixteen six.88″ 5.50″
three-3-508KX 1410 four.forty four” 1.19″ one.50″-16 seven.eighty one” six.47″
3-3-468KX 1410 4.44″ 1.19″ 1.fifty”-16 3.ninety one” 2.75″
three-3-448KX 1350 3.88″ one.19″ 1.50″-sixteen 7.31″ 6.12″
3-3-388KX 1350 3.88″ 1.19″ 1.50″-16 three.ninety four” 2.75″
3-3-2381KX 1410 4.forty four” one.19″ one.56″-16 eleven.50″ 9.fifty”
three-3-1641KX 1480 4.forty four” 1.38″ one.fifty six”-16 9.50″ 7.fifty”
three-3-1621KX 1480 four.forty four” 1.38″ 2.25″-10 3.72″ 2.59″
3-3-1601KX 1480 four.forty four” 1.38″ one.56″-16 six.eighty one” 5.50″
three-3-1511KX 1410 four.44″ 1.19″ 1.75″-16 3.twenty five” two.forty four”
three-3-118KX 1410 four.44″ one.19″ 1.fifty”-16 6.50″ 5.34″
two-3-5221KX 1280 three.forty seven” 1.06″ one.38″-sixteen 6.88″ 5.38″
2-3-5221KX 1310 3.forty seven” one.06″ one.38″-16 six.88″ 5.38″
two-3-258KX 1280 3.47″ one.06″ 1.twenty five”-sixteen four.12″ 3.12″
2-3-258KX 1310 3.forty seven” one.06″ one.25″-sixteen four.12″ three.12″

To Be Negotiated 500 Pieces
(Min. Order)

###

Material: Aluminum/Alloy

###

Customization:

###

 Standard Part #  Series ( E )Distance Across Lugs ( D )Bearing Diameter ( M )Spline Diameter & Number ( J )Centerline to End of Spline ( Q )Length  of Thru Hole
9-3-481KX 1910 2.56" 3.163"-36 Inv. 8.94" 6.30"
9-3-481-1KX 1910 2.56" 3.163"-36 Inv. 11.94" 9.30"
9-3-351-1KX 2150 4.750" 5.835"-34 Inv. 20.938" 17.87"
9-3-331-4KX 2050 3.812" 5.835"-34 Inv. 17.56" 14.50"
9-3-331-2KX 2050 3.812" 5.835"-34 Inv. 11.938" 8.50"
9-3-331-1KX 2050 3.812" 5.835"-34 Inv. 15.438" 12.38"
9-3-261KX 1950 3.062" 4.167"-24 Inv. 9.688" 6.126"
9-3-241KX 1950 3.062" 4.167"-24 Inv. 10.875" 7.313"
9-3-221KX 1950 3.062" 4.167"-24 Inv. 13.875" 10.313"
8-3-431KX 1880 8.09" 2.18" 4.17"-24 Inv. 5.03" 3.62"
8-3-411KX 1880 8.09" 2.18" 3"-16 11.65" 9.62"
8-3-391KX 1880 8.09" 2.18" 3"-16 10.03" 8.00"
6.5-3-1451KX 1810 7.55" 1.94" 3.25"-18 Inv. 5.38" 3.88"
6.5-3-1431KX 1810 7.55" 1.94" 3"-16 8.94" 7.38"
6.5-3-1371KX 1810 7.55" 1.94" 3"-16 11.88" 9.50"
6.5-3-1351KX 1810 7.55" 1.94" 3"-16 10.25" 7.88"
6.3-3-41KX 1760 7" 1.94" 2.50"-16 9.25" 6.78"
6.3-3-21KX 1760 7" 1.94" 2.50"-16 11.16" 8.69"
6-3-2741KX 1710 6.09" 1.94" 2.50"-16 7.47" 7.625"
6-3-2671KX 1710 6.09" 1.94" 2.50"-16 9.59" 7.875"
6-3-2651KX 1710 6.09" 1.94" 2.50"-16 11.69" 9.25"
6-3-2631KX 1710 6.09" 1.94" 2.50"-16 8.84" 7.50"
6-3-1661KX 1710 6.09" 1.94" 3.25"-18 Inv. 4.12" 2.74"
6-3-1481KX 1710 6.09" 1.94" 3.25"-18 Inv. 4.88" 3.50"
5-3-288KX 1610 5.31" 1.88" 2"-16 9.31" 7.38"
5-3-2261KX 1610 5.31" 1.88" 2"-16 10.81" 8.38"
5-3-2141KX 1610 5.31" 1.88" 2"-16 11.94" 9.00"
5-3-198KX 1610 5.31" 1.88" 2.673"-18 Inv. 4.25" 3"
5-3-188KX 1610 5.31" 1.88" 2.673"-18 Inv. 4.00" 2.75"
5-3-168KX 1610 5.31" 1.88" 2.673"-18 Inv. 3.50" 2.25"
5-3-108KX 1610 5.31" 1.88" 2"-16 7.81" 6.38"
4-3-1751KX 1550 5.25" 1.38" 1.75"-16 5.38" 4.00"
4-3-1431KX 1550 5.25" 1.38" 1.75"-16 10.06" 8.00"
4-3-1261KX 1550 5.25" 1.38" 2.50"-16 3.50" 2.56"
4-3-1241KX 1550 5.25" 1.38" 1.75"-16 6.88" 5.50"
3-3-508KX 1410 4.44" 1.19" 1.50"-16 7.81" 6.47"
3-3-468KX 1410 4.44" 1.19" 1.50"-16 3.91" 2.75"
3-3-448KX 1350 3.88" 1.19" 1.50"-16 7.31" 6.12"
3-3-388KX 1350 3.88" 1.19" 1.50"-16 3.94" 2.75"
3-3-2381KX 1410 4.44" 1.19" 1.56"-16 11.50" 9.50"
3-3-1641KX 1480 4.44" 1.38" 1.56"-16 9.50" 7.50"
3-3-1621KX 1480 4.44" 1.38" 2.25"-10 3.72" 2.59"
3-3-1601KX 1480 4.44" 1.38" 1.56"-16 6.81" 5.50"
3-3-1511KX 1410 4.44" 1.19" 1.75"-16 3.25" 2.44"
3-3-118KX 1410 4.44" 1.19" 1.50"-16 6.50" 5.34"
2-3-5221KX 1280 3.47" 1.06" 1.38"-16 6.88" 5.38"
2-3-5221KX 1310 3.47" 1.06" 1.38"-16 6.88" 5.38"
2-3-258KX 1280 3.47" 1.06" 1.25"-16 4.12" 3.12"
2-3-258KX 1310 3.47" 1.06" 1.25"-16 4.12" 3.12"
To Be Negotiated 500 Pieces
(Min. Order)

###

Material: Aluminum/Alloy

###

Customization:

###

 Standard Part #  Series ( E )Distance Across Lugs ( D )Bearing Diameter ( M )Spline Diameter & Number ( J )Centerline to End of Spline ( Q )Length  of Thru Hole
9-3-481KX 1910 2.56" 3.163"-36 Inv. 8.94" 6.30"
9-3-481-1KX 1910 2.56" 3.163"-36 Inv. 11.94" 9.30"
9-3-351-1KX 2150 4.750" 5.835"-34 Inv. 20.938" 17.87"
9-3-331-4KX 2050 3.812" 5.835"-34 Inv. 17.56" 14.50"
9-3-331-2KX 2050 3.812" 5.835"-34 Inv. 11.938" 8.50"
9-3-331-1KX 2050 3.812" 5.835"-34 Inv. 15.438" 12.38"
9-3-261KX 1950 3.062" 4.167"-24 Inv. 9.688" 6.126"
9-3-241KX 1950 3.062" 4.167"-24 Inv. 10.875" 7.313"
9-3-221KX 1950 3.062" 4.167"-24 Inv. 13.875" 10.313"
8-3-431KX 1880 8.09" 2.18" 4.17"-24 Inv. 5.03" 3.62"
8-3-411KX 1880 8.09" 2.18" 3"-16 11.65" 9.62"
8-3-391KX 1880 8.09" 2.18" 3"-16 10.03" 8.00"
6.5-3-1451KX 1810 7.55" 1.94" 3.25"-18 Inv. 5.38" 3.88"
6.5-3-1431KX 1810 7.55" 1.94" 3"-16 8.94" 7.38"
6.5-3-1371KX 1810 7.55" 1.94" 3"-16 11.88" 9.50"
6.5-3-1351KX 1810 7.55" 1.94" 3"-16 10.25" 7.88"
6.3-3-41KX 1760 7" 1.94" 2.50"-16 9.25" 6.78"
6.3-3-21KX 1760 7" 1.94" 2.50"-16 11.16" 8.69"
6-3-2741KX 1710 6.09" 1.94" 2.50"-16 7.47" 7.625"
6-3-2671KX 1710 6.09" 1.94" 2.50"-16 9.59" 7.875"
6-3-2651KX 1710 6.09" 1.94" 2.50"-16 11.69" 9.25"
6-3-2631KX 1710 6.09" 1.94" 2.50"-16 8.84" 7.50"
6-3-1661KX 1710 6.09" 1.94" 3.25"-18 Inv. 4.12" 2.74"
6-3-1481KX 1710 6.09" 1.94" 3.25"-18 Inv. 4.88" 3.50"
5-3-288KX 1610 5.31" 1.88" 2"-16 9.31" 7.38"
5-3-2261KX 1610 5.31" 1.88" 2"-16 10.81" 8.38"
5-3-2141KX 1610 5.31" 1.88" 2"-16 11.94" 9.00"
5-3-198KX 1610 5.31" 1.88" 2.673"-18 Inv. 4.25" 3"
5-3-188KX 1610 5.31" 1.88" 2.673"-18 Inv. 4.00" 2.75"
5-3-168KX 1610 5.31" 1.88" 2.673"-18 Inv. 3.50" 2.25"
5-3-108KX 1610 5.31" 1.88" 2"-16 7.81" 6.38"
4-3-1751KX 1550 5.25" 1.38" 1.75"-16 5.38" 4.00"
4-3-1431KX 1550 5.25" 1.38" 1.75"-16 10.06" 8.00"
4-3-1261KX 1550 5.25" 1.38" 2.50"-16 3.50" 2.56"
4-3-1241KX 1550 5.25" 1.38" 1.75"-16 6.88" 5.50"
3-3-508KX 1410 4.44" 1.19" 1.50"-16 7.81" 6.47"
3-3-468KX 1410 4.44" 1.19" 1.50"-16 3.91" 2.75"
3-3-448KX 1350 3.88" 1.19" 1.50"-16 7.31" 6.12"
3-3-388KX 1350 3.88" 1.19" 1.50"-16 3.94" 2.75"
3-3-2381KX 1410 4.44" 1.19" 1.56"-16 11.50" 9.50"
3-3-1641KX 1480 4.44" 1.38" 1.56"-16 9.50" 7.50"
3-3-1621KX 1480 4.44" 1.38" 2.25"-10 3.72" 2.59"
3-3-1601KX 1480 4.44" 1.38" 1.56"-16 6.81" 5.50"
3-3-1511KX 1410 4.44" 1.19" 1.75"-16 3.25" 2.44"
3-3-118KX 1410 4.44" 1.19" 1.50"-16 6.50" 5.34"
2-3-5221KX 1280 3.47" 1.06" 1.38"-16 6.88" 5.38"
2-3-5221KX 1310 3.47" 1.06" 1.38"-16 6.88" 5.38"
2-3-258KX 1280 3.47" 1.06" 1.25"-16 4.12" 3.12"
2-3-258KX 1310 3.47" 1.06" 1.25"-16 4.12" 3.12"

Choosing the Right PTO Shaft For Your Tractor

There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.
Shaft Collar

IID shaft

When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.

Reverse PTO

Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Shaft Collar

Square rigid shaft

When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Shaft Collar

Economy PTO

There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
China 2-3-258kx End Yoke     pto shaft bentChina 2-3-258kx End Yoke     pto shaft bent
editor by czh 2022-12-14

pto adapter

As one of leading pto adapter manufacturers, suppliers and exporters of mechanical products, We offer pto adapter and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto adapter

Recent Posts